NOTE: make sure that the rubber gasket remains inside of the groove on the enclosure. Attach the enclosure to the speaker with provided screws, fitting the groove on the edge of the enclosure onto the rim of the speaker. Connect the other set of terminal wires from the enclosure to the remaining set of "+" and "-" terminals on the speaker. Connect one set of terminal wires from the Retrofit Enclosure to one set of the "+" and "-" terminals on the speaker. Remove the jumpers that connect the two sets of terminals on the speaker for bi-wired models. Never over tighten.Ĭonnect the speaker wires from the amplifier to the set of terminals on the enclosure that were previously marked. IMPORTANT: Always use low-torque setttings. Apply an equal amount of torque to each screw. To ensure that the gasket sits properly, tighten the screws in a crisscross and diagonal pattern. NOTE: Make sure that the rubber gasket remains inside of the groove on the enclosure. Use the provided screws to attach the enclosure to the speaker, fitting the groove on the edge of the enclosure onto the rim of the speaker. Mark the set of terminals selected on the outside of the enclosure. Make sure to connect the red wire to the speaker's "+" terminal and the black wire to the speaker's "-" terminal. Select one set of "+" and "-" terminals on the Retrofit Enclosure and connect the wires to either set of "+" and "-" terminals on the speakers. For the enclosures to be effective it is important that they are installed according the following directions to ensure a tight seal with the speaker. Sonance Retrofit Speaker Enclosures reduce sound transmission into rooms that are adjacent to speakers mounted in walls or in ceilings.
#Sonance vp64r manual
File Info : application/pdf, 4 Pages, 264.99KB Document Document VP-Retrofit-Acoustic-Enclosures-Manual VISUAL PERFORMANCE RETROFIT ENCLOSURE INSTRUCTION MANUAL
0 kommentar(er)
